market leader with-in a short span of time.

GRP Linning


GRP lining is a best example of modern technology to protect the substrates from Corrosion & Water Leakage with cost-effectiveness. It gives immense strength to structures to face any sort’s of pressure. Also acts as the best method of Insulation to protect Water or any liquids from foreign bodies. GRP products are recommended as an alternative because of its flexibility, durability, lightweight, high intensity, aging & corrosion resistance, dimension stability and provides aesthetic look with smooth surface
We at Rise & Shine deal GRP lining from a comprehensive and more unique range of systems by specializing in hand lay-up applications. Our advanced precision moulding facilities enable us to range from small prototypes to high volume production in a multitude of sizes and to intricate shapes.
Over the last several years our Technical team has proven its capacity to attend a big volume of works by observing the various requirements of Authorities having Jurisdiction. Polychem Middle East, Knightsbridge & Scottbader are our prominent Resin suppliers who indeed having strong roots & network across GCC. The state of the art facilities, the strong Technical team provide 24/7 services to cater our all-time requirements.
As an eminent leader in GRP Products we design, manufacture and install extensively wide range of Water Tanks, Panel Tanks (Hot press / Insulated /Non Insulated) Chemical storage Tanks, Septic Tanks, Storm Water/Sewerage Tanks, Ladders, Manholes, Flower Pots, Water Falls, Gratings, Covers, Ladders and other industrial & decorative products. We have advanced machineries wherein moulding has been done as a professional manufacturer and still invest in the facilities and R & D for better quality GRP tanks.
Our scope of work has covered a wide range of industries including

Commercial & Residential Buildings



A firestopping is a fire protection system made of various components used to seal openings and joints in the fire-resistance rated wall and/or floor
assemblies. Firestopping are designed to restore the fire-resistance ratings of the wall and/or floor assemblies by impeding the spread of fire by filling the openings with fire-resistant materials. Unprotected openings in fire separations cancel out the fire-resistance ratings of the fire separations, allowing the spread of fire, usually past the limits of the fire safety plan of a building.
Firestopping components include intumescents, cementitious mortars, silicone, firestop pillows, mineral fibers, and rubber compounds.
Firestopping should be maintained in accordance with the listing, approval use, and compliance. Construction documentation sometimes includes an inventory of all firestopping in a building, with drawings indicating the location and the certification listings of each firestop. Using this, a building owner can meet the requirements of the fire code related to fire barriers during the period of building occupation. Otherwise, improper repairs may result, which would violate the fire code, and could allow a fire to travel between areas intended by code to be separated during a fire event.
Firestopping components include intumescents, cementitious mortars, silicone, firestop pillows, mineral fibers, and rubber compounds.

Opening Types

  • Electrical through-penetrations

  • Mechanical through-penetrations

  • Structural through-penetrations

  • Unpenetrated openings (openings for future use for example)

  • Re-entries of existing firestops

  • Control or sway joints within a fire-resistance rated wall or floor assemblies

  • Junctions between the fire-resistance rated wall or floor assemblies

  • "Head-of-wall" (HOW) joints, where non-load bearing wall assemblies meet floor assemblies



Fireproofing contractors in uae, a passive fire protection measure, refers to the act of making materials or structures more resistant to fire, or to those materials themselves, or the act of applying such materials. Applying a certification listed fireproofing system to certain structures allows these to have a fire-resistance rating. The term fireproof does not necessarily mean that an item cannot ever burn, it relates to measured performance under specific conditions of testing and evaluation. Fireproofing does not allow treated items to be entirely unaffected by any fire, as conventional materials are not immune to the effects of fire at a sufficient intensity and/or duration.
Passive Fire Protection measures are intended to contain a fire in the fire compartment of origin, thus limiting the spread of fire and smoke for a limited period of time, as determined the local building code and fire code. Passive fire protection measures, such as steel structures , fire stops, fire walls, and fire doors, are tested to determine the fire resistance rating of the final assembly, usually expressed in terms of hours of fire resistance (e.g. 30 mins,60 mins, 90 mins,120 mins). A certification listing provides the limitations of the rating.
An Intumescent is a substance that swells as a result of heat exposure, thus increasing in volume and decreasing in density. Intumescents are typically used in passive fire protection.
As the name suggests, passive fire protection (PFP) remains silent in your coating system till the eventuality of a fire.
There are mainly two types of PFP:
a) Vermiculite fire protection
b) Intumescent fire protection
vermiculite fire protection, the structural steel members are covered with vermiculite materials, mostly a very thick layer. This is a cheaper option as compared to an Intumescent one, but is very crude and aesthetically unpleasant. Moreover if the environment is corrosive in nature, then the vermiculite option is not advisable, as there is the possibility of water seeping into it (because of the porous nature of vermiculite), and there it is difficult to monitor for corrosion.
Intumescent fireproofing is a layer of paint which is applied along with the coating system on the structural steel members. The thickness of this Intumescent coating is dependent on the steel section used. For calculation of DFT (dry film thickness) a factor called Hp/A(heated perimeter divided by cross-sectional area), referred to as "section factor" and expressed in m-1, is used. Intumescent coatings are applied as an intermediate coat in a coating system (primer, intermediate, and top/finish coat). Because of the relatively low thickness of this Intumescent coating (usually in the 350- to 700-micrometer range),nice finish, and anti-corrosive nature, Intumescent coatings are preferred aesthetically and performance-wise.
It should be noted that in the eventuality of a fire, the steel structure will eventually collapse once the steel attains the critical core temperature (around 550 degrees Celsius or 850 degrees Fahrenheit). The PFP system will only delay this by creating a layer of char between the steel and fire. Depending upon the requirement, PFP systems can provide fire ratings in excess of 120 minutes. PFP systems are highly recommended in infrastructure projects as they can save lives and property.

Polyurethane Foam


Rise and Shine Group has been built with a strong foundation and vision of our founder Mr. Ravi Subramanyam a decade before in UAE, Sharjah. Since its inception, the group has shown its tremendous growth and spread its wings in five countries - UAE, Qatar, Oman, India, & KSA, operating with a group of expertise and dedicated talents, which made us a number one player in passive fire protection industry in all these five countries
Utilizing a unique and extensive range of superior products;combined with the expert knowledge and experience, Rise & Shine strives to deliver an innovative and value-driven solution to its clients in PU Foam Works.
We are specialized in quality and reliable solution for insulation and waterproofing jobs inclusing its application technical support and service to meet the specific requirements, for both in construction and industrial projects
Our unique Sai roofshield system is suitable for almost all common types of residential and industrial roofing, including corrugated fibro, aluminum, steel, concrete, timber, asbestos and bitumen


Super Acoustics Insulation [SAI] is the acoustics specialty division of the RNS group with a presence across the Middle East, South Asia, and North America. SAI manufactures world-class concrete underlayment products for the construction industry.


Our products are rigorously tested in accordance with international standards thus assuring the highest level in quality and performance.


At SAI, we believe in the fundamentals of Reuse, Reduce and Recycle. Our eco-friendly products are made from recycled rubber at our state of the art with our manufacturing facilities in the United Arab Emirates.


With a heavy focus on research and new product development, SAI invests heavily in people, processes and newer technologies in manufacturing.


Our multi-disciplined team understands the complex nature of many of our client’s acoustical problems. Our engineering services are built on over 15 years of the collective experience and the expertise to develop the best solutions for the engineering challenges at hand.

SAI-UNL is a robust and high performing acoustic underlay product which reduces the transmission of sound generated due to footfall, speech and structural bourne sound. It is ideal for concrete floor constructions which consists of tiles, wood, screed and gypsum. SAI-UNL underlayment system acts as a de-coupler which breaks the transmission of sound waves through the floor-ceiling assembly. Rigorous testing on SAI UNL has shown outstanding sound attenuation with various construction assemblies and floor coverings.



  • Eco-friendly rubber underlay produced using recycled rubber

  • Limits the transmission of air bourne and structural bourne sound

  • No breakage or movement when under load

  • Rigorously tested to the ASTM standards [A1073/A1073M-17, D1622-20, D412-16]

  • Manufactured in UAE and distributed globally